Talurit

The copper ferrule (TCU) is intended for stainless steel wire rope to avoid galvanic corrosion. The pressing of TCU ferrules requires approx 25% higher pressure than the corresponding T ferrule of aluminium alloy.

Note:
We do not guarantee the strength of slings for lifting activities made of Copper turnback ferrules. A termination performed according to our instructions will normally withstand a tensile strength of 90% of minimum breaking load (MBL) of the wire rope. Verifying tests must be done in order to secure the strength of the termination.

These ferrules have been validated according to TALURIT™ splicing system, which is within the framework of EN 13411-3. The copper material is not accepted in this standard.

  • Material: Copper (almost 99,9%)
  • Marking: According to standard
  • Standard: EN 13411-3
  • Note: See the manufacturer's product data sheet below for guidance on dimension selection.
TCU
Select a row from the table below, then click the add to quote button
Part Code Ferrule size Length
mm
-- 1 6.5
-- 1.5 8
-- 2 9
-- 2.5 12
-- 3 14
-- 3.5 16
-- 4 18
-- 4.5 20
-- 5 23
-- 6 27
-- 6.5 29
-- 7 32
-- 8 36
-- 9 40
-- 10 45
-- 11 50
-- 12 54
-- 13 59
-- 14 63
-- 16 72
-- 18 81
-- 20 90
-- 22 99
-- 24 108
-- 26 117
10.02TCU28 28 126
10.02TCU30 30 135

Diameter after pressing, see instruction.
Length is after pressing.

info / downloads