Crosby

General: sockets incorporate a reduced machined area of the shank which is the equivalent to the proper after swage dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC CHECK™ permanent visual inspection opportunity. Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it does not eliminate the need to perform standard production inspections which include gauging for the proper after swage dimensions or proof loading.
Hardness controlled by spheroidise annealing.
Swage socket terminations have an efficiency rating of 100% based on the catalogue strength of wire rope

Standard: Crosby Drawing.

 

  • Material: Carbon Steel.
  • Marking: ID code and Manufacturer's symbol.
  • Finish: Ungalvanised.
  • Safety factor: 5:1
Crosby S502
S502
Select a row from the table below, then click the add to quote button
Part Code Diameter
mm
Max. after swage dia. (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) H (mm) L (mm) Weight
kg
-- 6 11,7 109 12,7 35,1 19,1 6,85 54 12,7 89,0 0.15
04B0260 9-10 18,0 138 19,6 41,1 22,4 10,4 81 17 114 0.33
-- 8 18,0 138 19,6 41,1 22,4 8,65 81 17 114 0.34
04B0270 11-12 23,1 176 24,9 51,0 26,9 12,2 108 21,8 146 0.64
04B0280 13 23,1 176 24,9 51,0 26,9 14,0 108 21,8 146 0.64
04B0300 16 29,5 220 31,8 60,5 32,5 17 135 28,7 184 1.29
04B0295 14 29,5 220 31,8 60,5 31,8 15,5 135 28,7 184 1.32
04B0306 18-20 36,1 261 39,4 73 36,6 20,3 162 33,3 219 2.27
-- 22 39,4 303 43,2 79 44 23,9 189 38,1 257 3.08
-- 24-26 45,7 344 50,5 92 52,5 26,9 216 44,5 292 4.72
-- 28 52,0 382 57,0 102 58,5 30.2 243 51 324 6.72
-- 32 58,5 430 64,5 114 65 33,8 270 57 365 9.78
-- 33-34 65,0 473 71 127 65 36,8 297 57 400 12.9
-- 38-40 71,5 511 78 140 71,5 40,1 325 63 432 17.3
-- 44 77,5 598 86 159 90,5 47,2 378 76 508 23.1
-- 48-52 90,5 702 100 184 96,5 53,5 432 82,5 584 40.5