Habegger Winch

Today Habegger - HIT rope pulling machines are 1/3 lighter and offer increased operational safety, longer service life, less expenditure of force and considerably less rope wear.

Habegger’s patented clamping system simply prevents rope damage otherwise common to this type of machine.

The patented parallelogram clamping system which adapts itself automatically to the swelling rope when reversing the motion of the non-pulling grip jaw, has considerably less internal friction than systems known up to now, it is particularly suited to motorised use. The Swiss and other European armies rely on Habegger - HIT pulling machines. Because of use of these units for heavy duty assignments in ice and snow conditions, all dynamically stressed parts are fabricated from tempered nickel chromium alloyed steel.

The Habegger - HIT parallelogram rope pulling units can be disassembled, serviced and mounted without the help of special tools and fixtures. For maintenance purposes previously assembled parts are interchangeable.

After sales service with repair and maintenance facilities are available at your local Certex lifting centre.

HIT rope pulling machines

Habegger - HIT pulling machines are employed in all trades for pulling, lifting, lowering, adjusting and, with special attachments, also for pushing loads of every description.

The Habegger - HIT rope puller makes it possible to multiply manpower and, with motor drive, to multiply the conversion of engine power to a linear pulling force.

The advantage of the Habegger - HIT units is their considerably longer lifetime through the expenditure of less power and the opportunity to use lighter, more flexible and less rigid ropes. These advantages are the results of many years of research and endurance tests under severe conditions. With the new brick jaws which, when sliding back in the unstressed condition, adapt themselves in operation automatically to the increased rope diameter, the wear of the grip jaws as well as the rope wear are reduced. These advantages can only be found in the Habegger - HIT parallelogram.

A further advantage arises from the longer intervals between servicing than previously possible. This contributes to the substantially lower priced maintenance cost of our patented and proven system.

Wire Rope Hoist	Hit 6	Hit 10	Hit 16	Hit 32
Nominal capacity (pulling, lifting, lowering)	6kN	10kN	16kN	32kN
Overload safety device at	9kN	15kN	24kN	48kN
Weight without rope	4.2kg	6.5kg	12kg	21.5kg
Rope diameter	6.4mm	8.4mm	11.2mm	16.2mm
Effective rope breaking load	30kN	50kN	80kN	160kN
Rope feed per double-lift	30mm	55mm	60mm	30mm
Lever stress at nominal load	25kg	30kg	35kg	50kg
Lever extendable	-	-	-	-
Extendable for hydraulic drive	-	-	-	-
Case	-	-	-	-
Carrying handle	-	-	-	-
Part no. with rope	00600	00700	00800	00900
Part no. without rope	00599	00699	00799	00899

Certex UK . Unit C1 Harworth Industrial Estate . Bryans Close . Harworth . Doncaster . DN11 8RY . Tel: 0845 230 7475 Fax: 0845 230 7476 . sales@certex.co.uk

All statements, technical information and recommendations contained herein are believed to be reliable, but no guarentee is given as to their accuracy and/or completeness. The user must determine the suitability of the products for their own particulat purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith. Whilst every attempt has been made to ensure accuracy in the content of the tables, the information contained in this catalogue does not form part of any contact.