Home /
Products / Lifting Hardware / Shackles / Alloy Shackles
Alloy Shackles
Forged Shackles
Screw Pin
G-209
Screw pin anchor shackles meet the performance requirements of BS EN 13889
Bolt Type
G-2130
Bolt Type Anchor shackles with thin headbolt-nut with cotter pin. Meets the performance requirements of BS EN 13889
|
|
- Working Load Limit permanently shown on every shackle.
- Forged – Quenched and Tempered, with alloy pins.
- Capacities 1/3 through 150 tonnes.
- Look for the Red PinTM...the mark of genuine Crosby quality.
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification. Charges for proof testing and certification available when requested at the time of order.
- Hot Dip galvanised.
- Fatigue rated.
|
| Nominal Size (in.) |
Working LoadLimit* t |
Dimensions (mm) |
Tolerance +/- |
| A |
B |
C |
D |
E |
F |
G |
H |
L |
M |
P |
G |
A |
| 3/16 |
†.33 |
9.70 |
6.35 |
22.4 |
4.83 |
15.2 |
14.2 |
24.9 |
37.3 |
4.06 |
28.5 |
4.83 |
1.50 |
1.50 |
| 1/4 |
.50 |
11.9 |
7.87 |
28.7 |
6.35 |
19.8 |
15.5 |
32.5 |
46.7 |
4.83 |
35.1 |
6.35 |
1.50 |
1.50 |
| 5/16 |
.75 |
13.5 |
9.65 |
31.0 |
7.87 |
21.3 |
19.1 |
37.3 |
53.0 |
5.59 |
42.2 |
7.87 |
1.50 |
1.50 |
| 3/8 |
1 |
16.8 |
11.2 |
36.6 |
9.65 |
26.2 |
23.1 |
45.2 |
63.5 |
6.35 |
51.5 |
9.65 |
3.30 |
1.50 |
| 7/16 |
1.5 |
19.0 |
12.7 |
42.9 |
11.2 |
29.5 |
26.9 |
51.5 |
74.0 |
7.87 |
60.5 |
11.2 |
3.30 |
1.50 |
| 1/2 |
2 |
20.6 |
16.0 |
47.8 |
12.7 |
33.3 |
30.2 |
58.5 |
83.5 |
9.65 |
68.5 |
12.7 |
3.30 |
1.50 |
| 5/8 |
3.25 |
26.9 |
19.1 |
60.5 |
16.0 |
42.9 |
38.1 |
74.5 |
106 |
11.2 |
85.0 |
17.5 |
3.30 |
1.50 |
| 3/4 |
4.75 |
31.8 |
22.4 |
71.5 |
19.1 |
51.0 |
40.0 |
89.0 |
126 |
12.7 |
102 |
20.6 |
6.35 |
1.50 |
| 7/8 |
6.5 |
36.6 |
25.4 |
84.0 |
22.4 |
58.0 |
53.0 |
102 |
148 |
127 |
114 |
24.6 |
6.35 |
1.50 |
| 1 |
8.5 |
42.9 |
28.7 |
95.5 |
25.4 |
68.5 |
60.5 |
119 |
167 |
14.2 |
129 |
26.9 |
6.35 |
1.50 |
| 11/8 |
9.5 |
46.0 |
31.8 |
108 |
29.5 |
74.0 |
68.5 |
131 |
190 |
16.0 |
142 |
31.8 |
6.35 |
1.50 |
| 11/4 |
12 |
51.5 |
35.1 |
119 |
32.8 |
82.5 |
76.0 |
146 |
210 |
17.5 |
156 |
35.1 |
6.35 |
1.50 |
| 13/8 |
13.5 |
57.0 |
38.1 |
133 |
36.1 |
92.0 |
84.0 |
162 |
234 |
19.1 |
174 |
38.1 |
6.35 |
3.30 |
| 11/2 |
17 |
60.5 |
41.4 |
146 |
39.1 |
98.5 |
92.0 |
175 |
254 |
20.6 |
187 |
41.2 |
6.35 |
3.30 |
| 13/4 |
25 |
73.0 |
51.0 |
178 |
46.7 |
127 |
106 |
225 |
313 |
25.4 |
231 |
57.0 |
6.35 |
3.30 |
| 2 |
35 |
82.5 |
57.0 |
197 |
53.0 |
146 |
122 |
253 |
347 |
31.0 |
263 |
61.0 |
6.35 |
3.30 |
| 21/2 |
55 |
105 |
70.0 |
267 |
67.0 |
184 |
145 |
327 |
453 |
35.1 |
330 |
79.5 |
6.35 |
6.35 |
| 3 † |
85 |
127 |
82.5 |
330 |
76.0 |
200 |
165 |
216 |
546 |
- |
279 |
92 |
6.35 |
6.35 |
| 31/2 † |
120 |
133 |
95.0 |
372 |
92.0 |
229 |
203 |
- |
626 |
- |
- |
105 |
6.35 |
6.35 |
| 4 † |
150 |
140 |
108 |
368 |
104 |
254 |
229 |
- |
653 |
- |
- |
116 |
6.35 |
6.35 |
| * |
NOTE: Maximum Proof Load is 2 times the Working Load Limit or as designated. Maximum Ultimate Load is 6 times the Working Load Limit |
| † |
Furnished in Bolt Type only |
|
All statements, technical information and recommendations contained herein are believed to be reliable, but no guarentee is given as to their accuracy and/or completeness. The user must
determine the suitability of the products for their own particulat purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith.
Whilst every attempt has been made to ensure accuracy in the content of the tables, the information contained in this catalogue does not form part of any contact.