Crane End Stops

End Stops for crane rope applications

These end stops are designed for full proof applications of rotation resistant and low rotation ropes. The chamfered surface around the cylinder matches different fitting devices.

The bore of the end stop is slightly conical to distribute the stress over a larger area.

The exact diameter and length of the end stop assembly should be confirmed when an order is placed to ensure a good match between stop and device.

The end stop is specifically manufactured for rotation resistant and low rotational ropes with a fill factor between 0.61 and 0.76 for other rope types please contact Certex.

Material is mild carbon steel.

Stock Code	Rope Size	Finish Dia	Finish Length
04B0980	9mm	28mm	75mm
04B0990	13mm	32mm	95mm
04B1000	15mm	30mm	95mm
04B1010	17mm	40mm	108mm
04B1020	19mm	44mm	124mm
04B1030	21mm	44mm	124mm
04B1040	23mm	52mm	144mm

Certex UK . Unit C1 Harworth Industrial Estate . Bryans Close . Harworth . Doncaster . DN11 8RY . Tel: 0845 230 7475 Fax: 0845 230 7476 . sales@certex.co.uk

All statements, technical information and recommendations contained herein are believed to be reliable, but no guarentee is given as to their accuracy and/or completeness. The user must determine the suitability of the products for their own particulat purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith. Whilst every attempt has been made to ensure accuracy in the content of the tables, the information contained in this catalogue does not form part of any contact.