Non Marring Clamps

For the safe lifting and transporting of components and materials that cannot be damaged or marked.

Revolutionary, innovative development in the field of non marring safety clamps.

The jaws of the lifting clamp are made of a synthetic material with a very high coefficient of friction.

These new clamps are also extremely user-friendly (very compact, light and easy to operate) as you might expect from an IP clamp.

Non Marring Safety Clamps

IP NM

The IPNM safety lifting clamps are particularly suitable from

Aluminium (also with protective foil)
Stainless steel (also with protective foil)
Composite materials
Hardened steels >47Rc
Synthetics; such as plexiglass or trespa
Ground metals
Coated and painted materials
Copper and alloys
Wood such as triplex or multiplex
…and many other materials

I P Model.	WLL (t)	Jaw (mm)	Weight (kg)
0,5 IPNM	0,5	0 - 10 mm	2,5
0,5 IPNM/SJ	0,5	0 - 10 mm	2,4
0,5 IPNM/P	0,5	0 - 10 mm	2,8
0,1 IPSNM	0,1		3,2
0,25 IPSNM	0,25		4,0
0,5 IPHNM	Available on request
1,0 IPNM	1,0	0 - 20 mm	3,7


Vertical non-marring safety (IPNM)


Vertical non-marring safety clamp with short jaw (IPNM/SJ)


Both safety clamps can be provided with protection cap (IPNM/P)


Horizontal non-marring safety clamp (IPHNM)


Vertical non-marring safety screw clamp (IPSNM)

Certex UK . Unit C1 Harworth Industrial Estate . Bryans Close . Harworth . Doncaster . DN11 8RY . Tel: 0845 230 7475 Fax: 0845 230 7476 . sales@certex.co.uk

All statements, technical information and recommendations contained herein are believed to be reliable, but no guarentee is given as to their accuracy and/or completeness. The user must determine the suitability of the products for their own particulat purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith. Whilst every attempt has been made to ensure accuracy in the content of the tables, the information contained in this catalogue does not form part of any contact.