Brilube Advanced Wire Rope Dressings

• Advanced corrosion protection
• High lubricity
• Reduced fling off
• Enhanced rope life
• Effective penetration
• Easy application

Bridon’s Endurance range of steel wire ropes are flooded during manufacture with Brilube 16 high performance lubricant. This serves two functions. It provides corrosion protection and also minimises internal friction between wires and strands while the rope is in service. The protection provided by the manufacturing lubricant is normally adequate to prevent deterioration due to corrosion during shipment, storage and the early part of the rope’s life.

However, ropes are like any other machine and to achieve maximum operating life in service lubrication must be applied.

The type of service lubricant and frequency of application varies with the rope construction the operating conditions and its functional application.

Bridon’s unequalled experience in the world of wire rope manufacture and many years spent in the development of specialist in service lubricants have been used in the formulation of the Brilube range of products.

Brilube’s advanced formulation with proven performance helps to get the best from your rope.Brilube 30, 40 and 50 can be applied by brush, drip feed or portable pressurised sprayer.

Brilube 60, 70 and 90 can be pressure applied using in-line application systems which are available to suit a wide range of rope sizes and constructions. These systems operate by forcing the lubricant into the rope under high pressure, whilst simultaneously cleaning the rope and removing the moisture, residual lubricant and contaminants.