Plates and construction elements
Vertical transport

The new basic type IP10 is an innovation based on the familiar 'IPZ' and 'IPN' lifting clamps. The IPU10 model is there to replace the 'IPUZ' and 'IPUN' types of clamps. These new models have a larger jaw opening, which makes it possible to lift plates with very different thicknesses by using one and the same clamp. In addition, the clamp design emphasizes ergonomy and practical handleability.

basic type ipu10

IP offers you safe, user-friendly quality products at reasonable prices.

• All 'IP' vertical plate lifting clamps may be locked in the closed and in the open position.
• All 'IP' vertical plate lifting clamps can turn plates by 180º.
• All 'IP' vertical plate clamps may be used to lift materials with a hardness of up to 345 Brinell (37 Rc); in other words: they may be utilized for almost all commonly used types of steel.

Optional designs Based on your specific lifting problem, you may select one of several varieties of the basic types IP10 and IPU10. The following list includes some of the most common versions.   with a fixed hoisting eye with a universal hoisting eye       IPU10/A (A = autolocking) automatically locking IP10/H IPU10/H (H = hard, Hardox) for hard materials up to 450 Brinell (47 Rc) IP10/J.. IPU10/J.. (J = jaw) with a different jaw aperture IP10/R IPU10/R (R = remote release) can be opened by remote control via a cable IP10/S IPU10/S (S = stainless steel) with stainless steel gripping surfaces for stainless steel materials IP10/W IPU10/W (W= wedge) equipped with a sharp leg Lifting without damage (non-marking)     Different Working Load Limits (W.L.L.)