|
|
HomeCertificationInspectionProduct SupplyProduct HireTrainingMaintenanceNewsContactLocation |
             |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
|
 |
||
IPTK
The IPTK multi-purpose clamp has a tackle eye and is suitable as an anchor/fixation point on I beams. It is used for a large variety of uses in different industries.
For instance, it is used as an anchor in workshops and factories to hoist up and reposition pieces of machinery and other heavy objects.
In theatres it is used to suspend lighting from the ceiling.
The IPTK clamp is also used in the elevator shaft to hold the elevator compartment in place while maintenance or wire rope replacement procedures are performed.
IPTKWThe IPTKW clamp is an economy version of the IPTK model.
The IPTKW clamp is very suitable as an anchor point but is not as versatile as the IPTK clamp, that can be used for other purposes as well.
| Beam Clamps | |||
|---|---|---|---|
| I P Model. | WLL (t) | Jaw (mm) | Weight (kg) |
| 2-IPTKW | 2.00 | 75-190 | 4.0 |
| 3-IPTKW | 3.00 | 75-190 | 4.5 |
| 4-IPTKW | 4.00 | 150-280 | 6.3 |
| 5-IPTKW | 5.00 | 120-350 | 8.8 |
IPBC
The IPBC beam clamp is your ideal tool if you need to turn and/or lift beams.
Thanks to the special construction with the ergonomic lever, your work is made light & easy and can be carried out by a single person.
| Horizontal Plate Clamps - With Pre-tensioning Device | |||
|---|---|---|---|
| I P Model. | WLL (t) | Jaw (mm) | Weight (kg) |
| 1-IPBC | 1.00 | 0-20 | 3.5 |
| 2-IPBC | 2.00 | 0-25 | 6.5 |
IPBKZ
The IPBKZ clamp is a handy little beam clamp for the transfer and stacking of steel beams against each other or in the flanges. The design of the clamp results in a near horizontal lift.
| Beam Lifting/Stcking Clamps - H Position | |||
|---|---|---|---|
| I P Model. | WLL (t) | Jaw (mm) | Weight (kg) |
| 0.75-IPBKZ | 0.75 | 5-15 | 3.5 |
| 1.5-IPBKZ | 1.50 | 5-25 | 7.0 |
| 3.75-IPBKZ | 3.75 | 5-28 | 15.5 |
IPBHZ
If the beam is in the I position, the IPBHZ beam clamp is very suitable. It can grip the beam both at the ends or by the flanges, making it very suitable for the erection of structural beams and construction sites.
| Beam LiftingClamps | |||
|---|---|---|---|
| I P Model. | WLL (t) | Jaw (mm) | Weight (kg) |
| 0.75-IPBHZ | 0.75 | 0-25 | 3.0 |
| 1.5-IPBHZ | 1.50 | 0-25 | 6.0 |
| 3-IPBHZ | 3.00 | 0-40 | 10.5 |
| 4.5-IPBHZ | 4.50 | 0-40 | 25.0 |
IPBVNZ
The IPVNZ clamp is your ideal tool to position a beam under an angle., since with this clamp you can manually move to the centre of gravity of the beam.
This is very useful if you need to feed the beam onto a sawing bench or if you need to weld a beam onto a construction under an angle.
| Beam Lifting/Stcking Clamps | |||
|---|---|---|---|
| I P Model. | WLL (t) | Jaw (mm) | Weight (kg) |
| 0.75-IPBHZ | 0.75 | 0-25 | 3.0 |
| 1.5-IPBHZ | 1.50 | 0-25 | 6.0 |
| 3-IPBHZ | 3.00 | 0-40 | 10.5 |
| 4.5-IPBHZ | 4.50 | 0-40 | 25.0 |
IPBSNZ
If you need the beam to hang 100% straight with the flanges of the beam exactly horizontal, for instance when you weld the beam onto a ship section or other precision operations, we strongly recommend the use of the IPBSNZ clamp.
(for specification see IPBVNZ)
Beam Clamps